|
Document
Number
|
Title
|
|
IEC 60050-161
|
International Electrotechnical Vocabulary. Chapter 161: Electromagnetic compatibility |
|
IEC 60060-1
|
High-voltage test techniques. Part 1: General definitions and test requirements |
|
IEC 60060-2
|
High-voltage test techniques – Part 2: Measuring systems |
|
IEC 60060-3
|
High-voltage test techniques – Part 3: Definitions and requirements for on-site testing |
|
IEC 60118-13
|
Electroacoustics – Hearing aids – Part 13: Electromagnetic compatibility (EMC) |
|
IEC 60255-26
|
Measuring relays and protection equipment – Part 26: Electromagnetic compatibility requirements |
|
IEC 60469-1
|
Pulse techniques and apparatus. Part 1: Pulse terms and definitions |
|
IEC 60533
|
Electrical and electronic installations in ships – Electromagnetic compatibility |
|
IEC 60601-1-2
|
Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance – Collateral standard: Electromagnetic compatibility – Requirements and tests |
|
IEC 60728-2
|
Cabled distribution systems for television and sound signals – Part 2: Electromagnetic compatibility for equipment |
|
IEC 60728-12
|
Cabled distribution systems for television and sound signals – Part 12: Electromagnetic compatibility of systems |
|
IEC/TS 60816
|
Guide on methods of measurement of short duration transients on low-voltage power and signal lines
|
|
IEC 60870-2-1
|
Telecontrol equipment and systems – Part 2: Operating conditions – Section 1: Power supply and electromagnetic compatibility |
|
IEC 60974-10
|
Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements |
|
IEC/TR 61000-1-1
|
Electromagnetic compatibility (EMC) – Part 1: General – Section 1: Application and interpretation of fundamental definitions and terms
|
|
IEC/TS 61000-1-2
|
Electromagnetic compatibility (EMC) – Part 1-2: General – Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena
|
|
IEC/TR 61000-1-3
|
Electromagnetic compatibility (EMC) – Part 1-3: General – The effects of high-altitude EMP (HEMP) on civil equipment and systems
|
|
IEC/TR 61000-1-4
|
Electromagnetic compatibility (EMC) – Part 1-4: General – Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
|
|
IEC/TR 61000-1-5
|
Electromagnetic compatibility (EMC) – Part 1-5: General – High power electromagnetic (HPEM) effects on civil systems
|
|
IEC/TR 61000-2-1
|
Electromagnetic compatibility (EMC) – Part 2: Environment – Section 1: Description of the environment – Electromagnetic environment for low-frequency conducted disturbances and signaling in public power supply systems
|
|
IEC 61000-2-2
|
Electromagnetic compatibility (EMC) – Part 2-2: Environment – Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
|
|
IEC/TR 61000-2-3
|
Electromagnetic compatibility (EMC) – Part 2: Environment – Section 3: Description of the environment – Radiated and non-network-frequency-related conducted phenomena
|
|
IEC 61000-2-4
|
Electromagnetic compatibility (EMC) – Part 2-4: Environment – Compatibility levels in industrial plants for low-frequency conducted disturbances
|
|
IEC/TS 61000-2-5
|
Electromagnetic compatibility (EMC) – Part 2: Environment – Section 5: Classification of electromagnetic environments. Basic EMC publication
|
|
IEC/TR 61000-2-6
|
Electromagnetic compatibility (EMC) – Part 2: Environment – Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
|
|
IEC/TR 61000-2-7
|
Electromagnetic compatibility (EMC) – Part 2: Environment – Section 7: Low frequency magnetic fields in various environments
|
|
IEC/TR 61000-2-8
|
Electromagnetic compatibility (EMC) – Part 2-8: Environment – Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
|
|
IEC 61000-2-9
|
Electromagnetic compatibility (EMC) – Part 2: Environment – Section 9: Description of HEMP environment – Radiated disturbance. Basic EMC publication
|
|
IEC 61000-2-10
|
Electromagnetic compatibility (EMC) – Part 2-10: Environment – Description of HEMP environment – Conducted disturbance
|
|
IEC 61000-2-11
|
Electromagnetic compatibility (EMC) – Part 2-11: Environment – Classification of HEMP environments
|
|
IEC 61000-2-12
|
Electromagnetic compatibility (EMC) – Part 2-12: Environment – Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems
|
|
IEC 61000-2-13
|
Electromagnetic compatibility (EMC) – Part 2-13: Environment – High-power electromagnetic (HPEM) environments – Radiated and conducted
|
|
IEC/TR 61000-2-14
|
Electromagnetic compatibility (EMC) – Part 2-14: Environment – Overvoltages on public electricity distribution networks |
|
IEC 61000-3-2
|
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current <= 16 A per phase)
|
|
IEC 61000-3-3
|
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
|
|
IEC/TS 61000-3-4
|
Electromagnetic compatibility (EMC) – Part 3-4: Limits – Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
|
|
IEC/TS 61000-3-5
|
Electromagnetic compatibility (EMC) – Part 3: Limits – Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
|
|
IEC/TR 61000-3-6
|
Electromagnetic compatibility (EMC) – Part 3: Limits – Section 6: Assessment of emission limits for distorting loads in MV and HV power systems – Basic EMC publication
|
|
IEC/TR 61000-3-7
|
Electromagnetic compatibility (EMC) – Part 3: Limits – Section 7: Assessment of emission limits for fluctuating loads in MV and HV power systems – Basic EMC publication
|
|
IEC 61000-3-8
|
Electromagnetic compatibility (EMC) – Part 3: Limits – Section 8: Signaling on low-voltage electrical installations – Emission levels, frequency bands and electromagnetic disturbance levels
|
|
IEC 61000-3-11
|
Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75 A and subject to conditional connection
|
|
IEC 61000-3-12
|
Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase
|
|
IEC/TR 61000-3-13
|
Electromagnetic compatibility (EMC) – Part 3-13: Limits – Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems |
|
IEC 61000-4-1
|
Electromagnetic compatibility (EMC) – Part 4-1: Testing and measurement techniques – Overview of IEC 61000-4 series
|
|
IEC 61000-4-2
|
Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test
|
|
IEC 61000-4-3
|
Electromagnetic compatibility (EMC) – Part 4-3 : Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test
|
|
IEC 61000-4-4
|
Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test
|
|
IEC 61000-4-5
|
Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test
|
|
IEC 61000-4-6
|
Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields
|
|
IEC 61000-4-7
|
Electromagnetic compatibility (EMC) – Part 4-7: Testing and measurement techniques – General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
|
|
IEC 61000-4-8
|
Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test
|
|
IEC 61000-4-9
|
Electromagnetic compatibility (EMC) – Part 4-9: Testing and measurement techniques – Pulse magnetic field immunity test
|
|
IEC 61000-4-10
|
Electromagnetic compatibility (EMC) – Part 4-10: Testing and measurement techniques – Damped oscillatory magnetic field immunity test
|
|
IEC 61000-4-11
|
Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests
|
|
IEC 61000-4-12
|
Electromagnetic compatibility (EMC) – Part 4-12: Testing and measurement techniques – Ring wave immunity test
|
|
IEC 61000-4-13
|
Electromagnetic compatibility (EMC) – Part 4-13: Testing and measurement techniques – Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests
|
|
IEC 61000-4-14
|
Electromagnetic compatibility (EMC) – Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity test
|
|
IEC 61000-4-15
|
Electromagnetic compatibility (EMC) – Part 4: Testing and measurement techniques – Section 15: Flickermeter – Functional and design specifications
|
|
IEC 61000-4-16
|
Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted,
common mode disturbances in the frequency range 0 Hz to 150 kHz
|
|
IEC 61000-4-17
|
Electromagnetic compatibility (EMC) – Part 4-17: Testing and measurement techniques – Ripple on d.c. input power port immunity test
|
|
IEC 61000-4-18
|
Electromagnetic compatibility (EMC) – Part 4-18: Testing and measurement techniques – Damped oscillatory wave immunity test |
|
IEC 61000-4-20
|
Electromagnetic compatibility (EMC) – Part 4-20: Testing and measurement techniques – Emission and immunity testing in
transverse electromagnetic (TEM) waveguides
|
|
IEC 61000-4-21
|
Electromagnetic compatibility (EMC) – Part 4-21: Testing and measurement techniques – Reverberation chamber test methods
|
|
IEC 61000-4-23
|
Electromagnetic compatibility (EMC) – Part 4-23: Testing and measurement techniques – Test methods for protective devices for HEMP and other radiated disturbances
|
|
IEC 61000-4-24
|
Electromagnetic compatibility (EMC) – Part 4: Testing and measurement techniques – Section 24: Test methods for protective devices for HEMP conducted disturbance – Basic EMC Publication
|
|
IEC 61000-4-25
|
Electromagnetic compatibility (EMC) – Part 4-25: Testing and measurement techniques – HEMP immunity test methods for equipment and systems
|
|
IEC 61000-4-27
|
Electromagnetic compatibility (EMC) – Part 4-27: Testing and measurement techniques – Unbalance, immunity test
|
|
IEC 61000-4-28
|
Electromagnetic compatibility (EMC) – Part 4-28: Testing and measurement techniques – Variation of power frequency,
immunity test
|
|
IEC 61000-4-29
|
Electromagnetic compatibility (EMC) – Part 4-29: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
|
|
IEC 61000-4-30
|
Electromagnetic compatibility (EMC) – Part 4-30: Testing and measurement techniques – Power quality measurement methods
|
|
IEC/TR 61000-4-32
|
Electromagnetic compatibility (EMC) – Part 4-32: Testing and measurement techniques – High-altitude electromagnetic pulse (HEMP) simulator compendium
|
|
IEC 61000-4-33
|
Electromagnetic compatibility (EMC) – Part 4-33: Testing and measurement techniques – Measurement methods for high-power transient parameters
|
|
IEC 61000-4-34
|
Electromagnetic compatibility (EMC) – Part 4-34: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
|
|
IEC/TR 61000-5-1
|
Electromagnetic compatibility (EMC) – Part 5: Installation and mitigation guidelines – Section 1: General considerations – Basic EMC publication
|
|
IEC/TR 61000-5-2
|
Electromagnetic compatibility (EMC) – Part 5: Installation and mitigation guidelines – Section 2: Earthing and cabling
|
|
IEC/TR 61000-5-3
|
Electromagnetic compatibility (EMC) – Part 5-3: Installation and mitigation guidelines – HEMP protection concepts
|
|
IEC/TS 61000-5-4
|
Electromagnetic compatibility (EMC) – Part 5: Installation and mitigation guidelines – Section 4: Immunity to HEMP – Specifications for protective devices against HEMP radiated disturbance. Basic EMC Publication
|
|
IEC 61000-5-5
|
Electromagnetic compatibility (EMC) – Part 5: Installation and mitigation guidelines – Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication
|
|
IEC/TR 61000-5-6
|
Electromagnetic compatibility (EMC) – Part 5-6: Installation and mitigation guidelines – Mitigation of external EM influences
|
|
IEC 61000-5-7
|
Electromagnetic compatibility (EMC) – Part 5-7: Installation and mitigation guidelines – Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)
|
|
IEC 61000-6-1
|
Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity for residential, commercial and light-industrial environments
|
|
IEC 61000-6-2
|
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial environments
|
|
IEC 61000-6-3
|
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
|
|
IEC 61000-6-4
|
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
|
|
IEC/TS 61000-6-5
|
Electromagnetic compatibility (EMC) – Part 6-5: Generic standards – Immunity for power station and substation environments
|
|
IEC/TS 61000-6-6
|
Electromagnetic compatibility (EMC) – Part 6-6: Generic standards – HEMP immunity for indoor equipment
|
|
IEC 61204-3
|
Low-voltage power supplies, d.c. output – Part 3: Electromagnetic compatibility (EMC) |
|
IEC 61326-1
|
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
|
IEC 61326-2-1
|
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
|
IEC 61326-2-2
|
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
|
IEC 61326-2-3
|
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
|
IEC 61326-2-4
|
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
|
IEC 61326-2-5
|
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
|
IEC 61326-2-6
|
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
|
IEC 61340-3-1
|
Electrostatics – Part 3-1: Methods for simulation of electrostatic effects – Human body model (HBM) electrostatic discharge test waveforms |
|
IEC 61543
|
Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility |
|
IEC 61800-3
|
Adjustable speed electrical power drive systems – Part 3: EMC requirements and specific test methods |
|
IEC 61967-1
|
Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz – Part 1: General conditions and definitions |
|
IEC 62040-2
|
Uninterruptible power systems (UPS) – Part 2: Electromagnetic compatibility EMC) requirements |
|
IEC 62041
|
Power transformers, power supply units, reactors and similar products – EMC requirements |
|
IEC 62135-2
|
Resistance welding equipment – Part 2: Electromagnetic compatibility (EMC) requirements |
|
IEC 62153-4-0
|
Metallic communication cable test methods – Part 4-0: Electromagnetic compatibility (EMC) – Relationship between surface transfer impedance and screening attenuation, recommended limits |
|
IEC 62153-4-1
|
Metallic communication cable test methods – Part 4-1: Electromagnetic compatibility (EMC) – Introduction to electromagnetic (EMC) screening measurements |
|
IEC 62153-4-2
|
Metallic communication cable test methods – Part 4-2: Electromagnetic compatibility (EMC) – Screening and coupling attenuation – Injection clamp method |
|
IEC 62153-4-3
|
Metallic communication cable test methods – Part 4-3: Electromagnetic compatibility (EMC) – Surface transfer impedance – Triaxial method |
|
IEC 62153-4-4
|
Metallic communication cable test methods – Part 4-4: Electromagnetic compatibility (EMC) – Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz |
|
IEC 62153-4-5
|
Metallic communication cables test methods – Part 4-5: Electromagnetic compatibility (EMC) – Coupling or screening attenuation – Absorbing clamp method |
|
IEC 62153-4-6
|
Metallic communication cable test methods – Part 4-6: Electromagnetic compatibility (EMC) – Surface transfer impedance – Line injection method |
|
IEC 62153-4-7
|
Metallic communication cable test methods – Part 4-7: Electromagnetic compatibility (EMC) – Test method for measuring the transfer impedance and the screening – or the coupling attenuation – Tube in tube method |
|
IEC 62153-4-8
|
Metallic communication cable test methods – Part 4-8: Electromagnetic compatibility (EMC) – Capacitive coupling admittance |
|
IEC 62153-4-9
|
Metallic communication cable test methods – Part 4-9: Electromagnetic compatibility (EMC) – Coupling attenuation of screened balanced cables, triaxial method |
|
IEC 62236-1
|
Railway applications – Electromagnetic compatibility – Part 1: General |
|
IEC 62236-2
|
Railway applications – Electromagnetic compatibility – Part 2: Emission of the whole railway system to the outside world |
|
IEC 62236-3-1
|
Railway applications – Electromagnetic compatibility – Part 3-1: Rolling stock – Train and complete vehicle |
|
IEC 62236-3-2
|
Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock – Apparatus |
|
IEC 62236-4
|
Railway applications – Electromagnetic compatibility – Part 4: Emission and immunity of the signalling and telecommunications apparatus |
|
IEC 62236-5
|
Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus |
|
IEC 62310-2
|
Static transfer systems (STS) – Part 2: Electromagnetic compatibility (EMC) requirements |
|
IEC/TR 62482
|
Electrical installations in ships – Electromagnetic compatibility – Optimising of cable installations on ships – Testing method of routing distance |
