Извор : мепца инжењерство

Вацон Велика Британија – Користећи различите покретаче за брзину (ВСДс) је одличан начин за уштеду енергије, али, ако ваши ВСДс су више од пет година, време је да се још један поглед на њих, каже Стивен Тахар, Генерални директор ац променљиве експерта брзина диска, Вацон Велика Британија.

За последњих десет година, техничка штампа је била преплављена са причама о енергетским уштедама које се могу направити постављањем ВСДс. Приче су истините, који је разлог зашто су многе компаније већ инсталиран ВСДс. Када инжењери у овим компанијама видети уштеду енергије ВСД приче, они вероватно мисле да сам био тамо и уради то, али су они оправдани у седи назад и ужива сјај добро обављен посао? То зависи од старости њихових ВСДс. Ако су само неколико година, то је вероватно да је потребно даље акције. Али, ако су ВСДс преко пет година, то је друга прича.

That’s because the intrinsic efficiency of VSDs has improved considerably in recent years. It’s not, међутим, as simple as saying that VSD efficiency has improved by one or two per cent over the full operating range, because the efficiency improvements relate mostly to operation at reduced loads and speeds.

The efficiency of older drives running at less than 50% load can be surprisingly low – many small drives over five years old struggle to reach 60% efficiency at 40% load. The larger drives of the era fare somewhat better, but even with them, 80% efficiency at 40% load would have been considered satisfactory. In contrast, the latest ac VSDs deliver at least 90% efficiency down to 20% of full load.

But does this extra efficiency matter? After all, the gains are biggest when the drives are lightly loaded, and how often does that happen? In many applications, the answer is that the drives run lightly loaded most of the time.

Designers size motors for worst-case conditions – with an air-conditioning installation, на пример, this would be the hottest day of the year. Then they further increase the motor size “to be on the safe side”. This means most fan and pump motors rarely need to deliver full output. Instead, they spend their lives running lightly loaded, which is the least efficient area of operation for older VSDs. This is a very good reason to review the efficiency of older VSDs and, if necessary, replace them with modern products.

And it’s not only efficiency that will be improved by installing new drives. The latest units are much more reliable and, in today’s de-skilled world, this is a very real advantage. Додатно, modern VSDs have superior harmonic and EMC performance, making it easier for users to satisfy the demands of the supply authorities.

There’s no doubt that, in appropriate applications, VSDs deliver big energy savings but older VSDs aren’t a “fit-and-forget” solution. They probably did a great job in their day, but it’s likely that they are now markedly inferior to the latest products. Укратко, if your VSDs have passed their fifth birthday, it’s time to talk to an expert like Vacon about reviewing their performance. You may be pleasantly surprised at the savings you could make!

Извор : мепца инжењерство